Difference between revisions of "Troubleshooting"

From MechWarrior: Living Legends Wiki
Jump to: navigation, search
(Game doesn't start or crashes while starting)
m
Line 16: Line 16:
 
----
 
----
  
===I clicked on <code>Configuration</code> -> <code>Configure Controls</code> on the Launcher, but nothing happens.===
+
===I clicked on <code>Configure Controls</code> on the Launcher, but nothing happens.===
  
 
A: The Actionmapper application requires Java 32 bit to work. Click on [https://www.java.com/en/download/manual.jsp this link], then download the Windows Offline installer (not the 64 bit), and execute it.
 
A: The Actionmapper application requires Java 32 bit to work. Click on [https://www.java.com/en/download/manual.jsp this link], then download the Windows Offline installer (not the 64 bit), and execute it.

Revision as of 09:32, 19 October 2017

As with any Beta release of software, the MWLL mod does suffer from some crashing, lockups and bugs, but also Crysis itself is not perfect, and many problems come from the main game more than MWLL itself.

This FAQ aims to provide a list of frequently encountered technical problems in MWLL. If you do not find your question on here, you can find help in the #tech_support channel in our Discord!


Contents

The installer put the files into the wrong directory!

A: Right click on this link, then click on "Save As", and save it to your desktop, then merge it in your registry. Then, reboot your PC and run the MWLL installer. The installer should ask you for the MWLL installation directory now. Make sure to point it to the Crysis Wars installation directory, not to the MWLL directory!


The old link to MWLL Launcher is not working anymore!

A: With MWLL 0.9.0, we shipped a brand new Launcher. We suggest to create a link that points to the new launcher while installing the MWLL patch. You can also navigate to the MWLL installation folder, right click on MWLLLauncher and click Send to -> Desktop


I clicked on Configure Controls on the Launcher, but nothing happens.

A: The Actionmapper application requires Java 32 bit to work. Click on this link, then download the Windows Offline installer (not the 64 bit), and execute it.


Game doesn't start or crashes while starting

A: Follow these steps:

  • Make sure you installed all the redists. You find them in the installation folder of MWLL, in the Redists folder. Do not attempt to install the 64 bit redistributables in 32 bit systems.
  • Click on the toolbox icon of the Launcher, check the Verify Crysis Files option, then click on Repair Install
  • If it crashes while launching, you might have a corrupted profile. In this case, you have to delete this folder: %USERPROFILE%/Documents/My Games/Crysis Wars/Profiles/

When I start up MWLL, my screen goes black and nothing happens!

A: MWLL takes a while to start up due to the inbuilt client side cheat protection. On some machines this can give you up to 30 seconds of black screen, so give it a little while and see if it loads. If it still fails to load, try to follow these steps:

  • Make sure you installed MWLL using the new Lite Installer Package and you are using the new MWLL Launcher
  • Try to delete this folder: %USERPROFILE%/Documents/My Games/Crysis Wars/Profiles/ before starting the launcher.
  • Try to restart Windows' BFE service. An alternative to restarting the BFE service is simply to reboot your computer.
    • Close MWLL
    • Click Start, type services.msc and hit enter
    • Locate and right click on the service named BFE (Base Filtering Engine)
    • Click on Restart
    • Close the Services prompt, and start MWLL
  • If this still fails, try to switch to either OpenDNS or GoogleDNS. Instructions are here
  • If all of this still fails, you can give the Alt. Launcher a try. It comes with its own server browser and bypasses GameSpy/Qtracker altogether.

When I start up MWLL, a weird console thing appears!

A: Just close it with tilde (~) or ESC. This is necessary to workaround an old CryEngine bug.


MWLL won't allow me to select the correct resolution of my screen

A: There's a very tiny scroller on the right side of the drop down resolution list. Drag it down, and you should see all the resolution supported.

  • Crysis Wars supports resolutions up to 1920x1200. If 1920x1200 is not available, make sure to disable any multi-GPU setup, such as Nvidia Optimus if on laptop, Nvidia SLI or AMD CrossFire if on desktop. You can also force higher resolutions in the config file, which is %USERPROFILE%/Documents/My Games/Crysis Wars/game.cfg The commands are r_width and r_height, which respectively set the screen width and height resolution (in pixels)

When I connect to a server, I get a "modified files" error and the game closes!

A: Just start the game again and connect normally. This is a bug that made it into 0.8 - it can happen when just having freshly installed MWLL. If that doesn't solve it, you can click on Verify Instal on the new launcher.


My game crashes often, especially when I try to zoom!

A: Crashes happen. Sorry! We are working on fixing them. Here are some tweaks that could make the game more stable:

  • Crysis Wars officially supports resolution up to 1920x1200. Anything above (2k, 4k) might cause unexpected crashes (especially while zooming).
  • Make sure you are running 64 bit mode. You can set it on the Launcher. 32 bit mode is not reccomended, as it is more unstable than the 64 bit mode.
  • Crysis Wars is known to hate overlays. Many crashes are caused by them. Disabling all the overlays (Steam, TeamSpeak, Discord) will make the game more stable.
  • Disable hardware acceleration on your Discord client, if you are running it.
  • Close your web browser.
  • Make sure you don't run the game through Steam.
  • If you are using a multi-GPU setup (Nvidia SLI, AMD CrossFire, or Nvidia Optimus), disable it. You don't really need much GPU power anyway.

I lost my connection/crashed and now the server tells me "authentication failed" / I'm stuck on the loading screen when I try to reconnect!

A: Try again in 30-60 seconds. The server still sees your player and it takes a a short while until it times out.


I have terrible ping and the game lags a lot!

A: This can have many causes. Pay attention to where the server you're playing on is located. Ping will increase with distance.

  • Are you on Windows 10? Go to Windows Update settings -> Advanced options -> Choose how updates are delivered and set Updates from more than one place and set it to Off or PCs on my local network. Also disable all telemetry that you can find. You can also use Spybot Anti-Beacon] for this.
  • Do you have an overeager firewall or something like that? Try disabling it temporarily. Some routers also have problems with the UDP spam that CryEngine produces.
  • Furthermore, large games that hit the player limit simply stress the engine too much and you will feel like you're lagging occasionally, this cannot be helped.

I get disconnected a lot during the game, the error reads "Malformed packet"

A: It is not known where exactly this error comes from, and the dev team is looking into it with a high priority. It can happen to some players more than others. Some players report that restarting or even replacing their network router works around it.


Discord / TeamSpeak / Steam overlays don't work!

A: CryEngine hates overlays. Not really much to do about that. Using overlays is not advisable, because they negatively affect the game stability.


My console becomes black when I open it, and clouds, terrain or the HUD get funny colors.

A: This is known as the rainbow bug or shader bug, it can be fixed by clicking the "clear shader cache" button in the MWLL launcher. You can prevent this bug from happening by opening and closing the console after you started the game. You can add the line consoleshow to your user.cfg in your My Documents/My Games/Crysis Wars/MWLL/Client/ directory to have it open automatically. The combined installer should be unaffected as it already comes with such a suitable autoexec.


My sound is very choppy/keeps cutting out/pops.

A: In Windows, go to Control Panel -> Sound -> Select your playback device -> Click Properties -> Advanced tab. Problems can appear if you use a too high sample rate. Try with 2 channel, 16 bit, 44100 Hz (CD Quality)


I have an high refresh rate monitor (75Hz, 120Hz, 144Hz), but when in Fullscreen mode, the screen will use a slower refresh rate (50Hz / 60Hz)

A: It's not possible to manually specify the refresh rate of the monitor while in Fullscreen mode, and for some reason, the game will cap the refresh rate at 50Hz / 60Hz if you do that. Only solution for that is to run the game in Windowed mode. Also, remember to disable V-Sync (use r_vsync=0 in the console).


How can I run the game in Fullscreen-Window / borderless-window mode?

A: CryEngine 2 doesn't support that screen mode. You need a third party application like Borderless Gaming. Remember to set the game in Windowed mode and to disable V-Sync if you want to use this.


My mech's torso doesn't move like it should, controls are all wonky, what's up?

A: Make sure you have no gamepad or controller plugged in, as this can mess with Crysis' key and mouse inputs.


I can't get my Joystick to work!

A: Crysis Wars only supports XInput devices. (i.e. X360 pad, or X360 emulators).

You can workaround this by reading this guide or see the Joystick Setup page.


How do I disable force-feedback on my joystick/gamepad?

A: Add this to your user.cfg: i_forcefeedback = 0

It's also a good idea to have a look at Game.log with a text editor when you're having problems. It's located in the Crysis Wars directory.\


What happened to my configuration (autoexec.cfg) file? It worked just a patch ago!

A: Patch 0.8.6 introduced a new file structure where autoexec.cfg no longer controls various settings related to MWLL. Instead, look for the user.cfg in %USERPROFILE%/Documents/My Games/Crysis Wars/MWLL/Client/User.cfg and place your settings there instead.



It's also a good idea to have a look at Game.log with a text editor when you're having problems. It's located in the %USERPROFILE%/Documents/My Games/Crysis Wars/MWLL/Client/ directory.